Casement and Awning Windows

• To close window, turn handle in clockwise motion
   
• Turn handle, JUST until you feel resistance on handle
  DO NOT FORCE HANDLE (sash should just meet frame)
   
• Push down on lock(s) allowing the lock(s) to pull the sash in tightly to the frame
   
• Forcing the handle will damage the gears in the operating hardware
   
• Be sure the locks are in the open position before turning the handle counter-clockwise to open
   
• For multipoint locking, simply push down on the single lever into the locked position

Horizontal Single Sliders and Double Sliders

• Keep tracks clean of dirt and debris
   
• Check rollers by lifting out sash (single sliders) or by tilting sash (double slider)
   
• Before tilting sash of double slider, be sure to slide sash a minimum of 1 inch (2.5 cm) 
  past the side frames. This will prevent damage of the frame
   
• Check the exterior drainage holes to be sure they are clear of dirt and debris

Single and Double Hung

• Keep bottom sill clean
   
• Raise sash a minimum of 1 inch (2.5 cm) past the bottom edge of the window before tilting inward for cleaning. This will prevent damage of the frame.
   
• Check the exterior drainage holes to be sure they are clear of dirt and debris

Download PDF of our Operating Instructions